More details about installing and updating the driver (the procedure is very similar) in Win 7:Ī) Find a VCP driver for your chip on the Internet.įor the FTDI chip (ft232.), Go here: In the table: Currently Supported VCP Drivers This is a USB device driver that you plug into a computer that simulates the operation of this device on a virtual COM port (hopefully clear)). If you have not bought a cable yet, then it is better to take with an FTDI chip (ft232.)!ĭepending on the type of chip in the cable, we put a VCP driver under it. Install the appropriate VCP driver for your KKL cable.īecause KKL cable can be made on different chips (FTDI or ft232., Ch34x, …), then I recommend just disassembling the cable and looking at the type of chip in your cable (just unscrew 4 screws). VAG EEPROM Programmer 1.19g Free Download – are not suitable for reading / writing device firmware!ĭownload the VAG epprom programmer 1.19g program (version 1.19G, because only this version learned to work through the VCP driver). Vag k + can commander 1.4 With a USB connector.Ĭables like vcds / Vasya 10.6, 11.11, 12.12, 18.9, etc. KKL cable (cable working through the K-line) is suitable
